bet5365亚洲版-首页

Features:

1. Temperature sensor using epoxy sealing glass to encapsulate thermistor

2. It can be equipped with temperature sensor for control and abnormality monitoring

3. The resistance value and B value have high precision, good consistency and interchangeability

4. Good insulation, high reliability and fast response speed

5. Double-layer sealing process is adopted, which has good insulation and sealing performance and resistance to mechanical collision, bending resistance and high reliability.

6. It can work stably for a long time (annual resistance value drift rate ≤ 1%).

Application:

1. Air conditioning temperature measurement, air conditioning room temperature, outside air temperature detection.

2. Smart toilet lid temperature measurement.

3. Electronic thermometer and hygrometer, car temperature measurement, electronic perpetual calendar, rechargeable battery pack, wireless charger.

Electrical characteristics:

1. Thermal response time: ≤12 seconds in a water bath

2. Dissipation coefficient: about 2.0mW/℃ in the static air

3. Withstand voltage test: AC 2100V 2mA for 1 second, no flashover, no breakdown and other abnormal phenomena in the steel ball

4. Insulation test: ≥100MΩ

5. Rated power: ≤10mW

6. Operating temperature: -30℃～105℃

Outline structure drawing:

Order notice:

Please inform the following parameters when ordering NTC temperature sensor:

1. How much resistance is required (can be selected according to the above table)

2. How much B value is required (can be selected according to the above table)

3. Working environment (whether waterproof, moisture-proof, cold-resistant and others are required)

4. Purpose: Choose different temperature-resistant wires for different purposes, different resistance values, etc.

5. What is the operating temperature range?

6. Accuracy requirements (1%-5% optional)

7. Shell material (copper, brass, stainless steel, ABS, epoxy resin, etc.)

8. Shell size (all can be customized)

9. Wire and length (all can be customized)

10. Does the end of the wire need a connector? (Molex, JST, CJT, etc. are optional).

Conventional resistance R-T table: